Home > Dual Boot > Run Win 7 Prof On One HD And XP On Another?

Run Win 7 Prof On One HD And XP On Another?


Mine is working fine and has no issues whatsoever. (I installed Win7 then XP) I have also now dual booted Windows Homeserver with XP, was a little more difficult, but is I have XP home edition – is this the problem???? If you try to choose the Upgrade option, the program says to load Windows XP and then run the Installation DVD. (And then, when you return to this screen and click And you'll notice that method one section 2: To Use a Separate Hard Disk Drive than the XP Drive, is exactly as I stated in my last post.

Click the Install Now button. Did you try that? To do the whole process I used a PS2 mouse and a USB keyboard. To make a dual boot system on two disks simply install Windows XP first and then Windows 7.

Dual Boot Windows Xp And Windows 7

If you have a SATA drive, then you will need to do either one of these options to load the SATA drivers for XP for your specific motherboard.How to Slipstream SATA In case Windows XP the file "ntldr" from active partition is loaded and executed, in case Windows 7 the file "bootmgr" (from active partition) is loaded and executed. When finished, restart the computer to have the option to boot from XP (Earlier Verision of Windows) or Windows 7. (See screenshot below) Note If you are only booting into I finally figured out how to do it: adding, with easybcd, a boot item for wubi, then using bcdedit, editing both its drive and its path.

You might have to start over. I have a new computer with Win 7, followed all the instructions but after reboot the screen only shows Windows 7 and Ramdisk Options. It was really annoying. Windows Xp Dual Boot Windows 10 Of course there are other ways of creating a dual boot system, but this is the method I have been using and it’s simple and effective.

Win7 igores it and does not assoign a drive letter. Dual Boot Windows 7 And Xp Separate Hard Drives December 24, 2010 RonB I tried to dual boot XP on a p6610f PC. Get the answer SR-71 BlackbirdApr 28, 2011, 12:26 AM http://www.sevenforums.com/tutorials/8057-dual-boot-installation-windows-7-xp.htmlGo to this link it explains everthing!!!!!!!!!!!!!!!!!!!!!!!!!!!!! http://www.sevenforums.com/tutorials/8057-dual-boot-installation-windows-7-xp.html It does not apply.

DalSan M April 14, 2013 at 8:55 pm You could try Windows Easy Transfer, thing not 100% sure it will work for all programs. Dual Boot Windows 7 And Xp Easybcd The path should be wubildr.mbr, in spite of all claims to the contrary. I have a clean blank other SINGLE (SATA) hard drive upon which I will install Windows XP Professional (32-bit).3. Select DVD/CD drive as your first boot device on the bios setup.3.

Dual Boot Windows 7 And Xp Separate Hard Drives

I tried directly installed a Windows XP on my Notebook. My System Specs Computer type PC/Desktop System Manufacturer/Model Number Self built custom OS 64-bit Windows 10 Pro CPU Intel i7-3930K 3.2 Ghz (O/C 4 Ghz) Motherboard ASRock X79 Extreme11 Memory 32 Dual Boot Windows Xp And Windows 7 You might see if reinstalling using METHOD TWO may allow it to work afterwards. How To Dual Boot Windows Xp And Windows 7 (xp Installed First) Does it happen when booting into Safe Mode?

December 20, 2010 Mark Hi All, My question maybe simple but probably difficult. Ask ! Can I do this without much drama or is using a usb external hdd caddy a better option? Here we’re installing XP Professional on the new partition. How To Install Windows Xp Over Windows 7

To upgrade from Windows XP to Windows 7, known as a “clean install,” follow these steps. I'd like a boot menu to come up giving me a choice to boot to either the Win7 drive OR the Win XP Prof. All you need to do is just install win 7 and then once you have the system up and running, install xp and choose another folder. Thnaks a lot April 22, 2011 Gianfranco Somebody can help me please?

I'm afraid to try to validate it as I still will use XP on the other machine. Dual Boot Windows 7 And Xp Same Partition Conclusion If you want to set a default OS on your dual boot system, check out The Geek’s tutorial on how to set it up. Make your IDE HDD (The HDD with XP on it) the second boot device.4.

I installed Windows XP SP3 and when i install EasyBCD the executable gives an error.

You don't need to partion the hard drive to install xp and won 7. I have a problem: When I get to the screen after it loads and I agree to the terms, there is a screen sayingthat I am required to insert a previous Too many projects! Dual Boot Windows 7 And Xp Usb Drive Back up everything.

And i hope, u formated ur hdd on NTFS :) First, open your computer case and check to see if you have a IDE or a SATA dvd/rw drive. And would I need to make folders for them, or do they go to the correct place automatically? Windows 7 gives you options: Home, Work, or a Public. But instead of creating a third primary partition, the setup program created an extended partition and a logical partition inside it.

What does '(:0)' in the output of the command 'who' mean? Just narrating my experience for what it's worth. I am getting increasingly frustrated by this whole bloody microsoft nonsense – sob! Best regards BigYin July 13, 2011 bigyin Hi There Mr Moderator.

by R. and does the xp version have to be a 64bit as well? This is a modiffied XP install disk that has the AHCI/RAID drivers merged into the windows installer, thus during the installation you can bypass the F6 routine.Windows 7 has native SATA Before we can begin, you’ll need to make sure you have the following three things: VirtualBox: Other virtual machine programs are out there, but this one has a lot going for

What I've done is described in this baarod's tutorial. I am wanting to copy all IDE 111GB HDD contents (software and data) onto a new WD SATA 250GB HDD and add this HDD to the new system. Appear a black screen, saying something like: "Error Disk, Press Ctrl+alt+Del to restart", also appears like some strangers letters or numbers. If you read all these threads, you will see that these replies have been going on for months and many have no good results.

Some people don't like to use the F6 during an install so they will create a slipstream cd/dvd. go to your computer manufacturer website and download the SATA drivers, put the drivers on USB flash or floppy, provide the SATA drivers during Win XP installation if you want to Flag Permalink This was helpful (0) Back to Windows 7 forum 27 total posts Popular Forums icon Computer Help 51,912 discussions icon Computer Newbies 10,498 discussions icon Laptops 20,411 discussions icon Many thanks in advance Louis February 13, 2010 anton I have a same problem as Louis.

I built the system myself and I believe just booted the XP disk and did partition and format.I apologize for my ignorance but I must ask why the following was at Then, in Step 10, just click the Next button. A note about resizing volumes and 3rd Party Disk Defragmentation Software, such as Diskeeper, etc. It reads - WarningIf you have a RAID setup, you will need to have the XP RAID drivers on a Floppy disc available to select and load at the F6 prompt